Tamko shingle installation starts with a peel-and stick ice shield and water shield. This product stops moisture from getting into your roof's valleys, which are where rain and snow melt funnel. These areas need extra protection against long-term wear and tear. Next, a layer of shingle is laid to protect against moisture and provide padding for the last layer of shingles. Specially designed starter and hip and ridge tabs are used to install the shingles.
About two years into construction, sticky tar-like substances began to build up on the roof. The tar-like substance caused significant damage to the house, and the homeowners had to spend $1 million in cleaning it up. TAMKO, the manufacturer of the tar-like material, admitted that it misled consumers by falsely claiming that the product could withstand 250 degrees and was not a good choice for these climates.
It was determined that the product was not a good choice for this home. Homeowners spent over $1million to clean up the mess. A TAMKO representative said that the product was faulty and had caused severe damage to the home. The company apologized, admitting that they had made a mistake and was misleading customers. The product was not designed to withstand temperatures above 250°C. TAMKO had never publicly apologized for its error before. The tar-like substance was due to a problem with the water shield and ice.
FAQ
How often should my furnace filter be changed?
How often your family expects to use the heating system in their home will determine the answer. It is worth changing your filter more often if you intend to spend a lot of time outside during winter months. But if you do not often go outside, it may be possible to wait longer between changing your filter.
The average furnace filter will last approximately three months. This means you should change your furnace filters once every three months.
You can also consult the manufacturer's recommendations regarding when to change your filters. Some manufacturers recommend replacing your filter after each heating season, while others suggest waiting until there is visible dirt buildup.
Is it better for a contractor to hire or a subcontractor to do the job?
Hiring a general contract is typically more costly than hiring subcontractors. A general contractor has many employees, so they often charge their clients a lot of money for labor costs. On the other hand, a subcontractor only hires one employee, so he or she charges less per hour.
How do I select a competent contractor?
Ask friends and family for recommendations when selecting a contractor. Check out online reviews. It is important to confirm that the contractor that you choose has worked in the same area as you. Ask for references and check them out.
What should I do if I want to hire an architect/builder?
It might be easier to have someone else do the work if you're planning on renovating your own house. But if your goal is to buy a house, hiring an architect/builder will ensure that you get the home you desire.
Statistics
- On jumbo loans of more than $636,150, you'll be able to borrow up to 80% of the home's completed value. (kiplinger.com)
- Most lenders will lend you up to 75% or 80% of the appraised value of your home, but some will go higher. (kiplinger.com)
- They'll usually lend up to 90% of your home's "as-completed" value, but no more than $424,100 in most locales or $636,150 in high-cost areas. (kiplinger.com)
- ‘The potential added value of a loft conversion, which could create an extra bedroom and ensuite, could be as much as 20 per cent and 15 per cent for a garage conversion.' (realhomes.com)
- A final payment of, say, 5% to 10% will be due when the space is livable and usable (your contract probably will say "substantial completion"). (kiplinger.com)
External Links
How To
Do you want to renovate your interior or exterior first.
Which one should I do first?
There are many factors you need to consider when choosing which project you want to work on. The most common factor is whether the building is old or new. There are many factors to consider if the building is older, such as its roof, condition, windows, doors and flooring. You should also consider the design, location, size, number and style of the building.
If the building has an older roof, it is worth looking at the roof first. If it looks like the roof could collapse any minute now, you may want to start on the renovation. Next, you can check if your roof is okay. Next, look at the windows. You might need to replace them if they are damaged or stained. Next, clean the doors and ensure that they are free of debris. Once everything is clean, you can then begin to put the floors together. Make sure that the flooring is solid and sturdy so that no matter how hard you walk on it, nothing breaks. After you have completed these steps, you can move on the walls. Take a look at the walls to see if any cracks or damage are present. If the wall appears to be in good shape, you can continue to the next steps. Finally, once the walls are inspected, you can work on the ceiling. The ceiling should be inspected to make sure it can support any weight that you might place on it. You can then move on with your renovation if everything looks good.
You would want to begin with the exterior if the building was recently built. Take a look at the outside of your house. Is it clean? Are there cracks around? Does the exterior look great? You should fix any exterior problems. Your home shouldn't look shabby. Next, check the foundation. You should repair any foundation that appears weak. Also, check the driveway. It should be flat and smooth. It should be smooth and flat. If it isn’t, you need to fix it. Check the sidewalk as well. If the sidewalk is uneven, it should be replaced.
Once these areas are checked, you should move on to the inside of the house. First, take a look at the kitchen. Is it clean and well-maintained? You should clean up any mess. Next, make sure to inspect the appliances. They should be in good shape and working properly. If they aren’t in great shape, then either you buy new ones or replace them. You can then inspect the cabinets. If the cabinets are stained, or have been scratched, you can probably paint them. If they are in good shape, then you can move to the bathroom. Here, check the toilet. If it leaks, it is time to get a new one. If it's just dirty, then you should probably wash it. Next, make sure you inspect all the fixtures. Check that the fixtures are clean. If they're dirty, you need to clean them. Finally, make sure to inspect the countertops. You should repaint countertops that are cracked or chipped. Sealant should be used if the surfaces are smooth and shiny.
Last, check the furniture. Check that nothing is damaged or missing. If you find something missing, it's best to fix it. You should fix anything broken. After you've checked everything, it is possible to move outside and complete the job.